Télécharger Imprimer la page

NAUSICAA NAUSIFLY 3 Manuel D'utilisation page 54

Masquer les pouces Voir aussi pour NAUSIFLY 3:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 1
Cleaning & Maintenance
BEFORE HANDLING:
• Unplug the power cord from the mains.
• Check that all electrical components are connected to each other.
• Clean the electrical enclosures of the cylinders and wire controls if they have been splashed with body fluids,
especially urine.
OBJECTIVE:
• Restore the lift and avoid the transmission of germs from one patient to another.
• Remove any organic soiling by mechanical action (detersion) or chemical action (disinfection).
CLEANING PROCEDURE:
• Clean the surfaces with a damp cloth using a suitable detergent.
• Regular cleaning is recommended and should therefore be added to the internal tasks.
ATTENTION :
• The detergents used should be pH neutral.
• Avoid abrasive products and solvents as they may damage the surface of the unit.
DAILY MAINTENANCE:
• By means of a surface product applied in one operation.
• Maintenance at discharge with the following procedure:
- Cleaning is carried out using a cloth impregnated with a surface disinfectant solution.
• Specific maintenance by service providers after removal of the lift from the facility:
- Bioneting operation.
- Steam cleaning of the various flat surfaces. Regularly change the washing surfaces to avoid water contamina-
tion. Steam clean parts that are difficult to access. For tubes, use steam with a microfibre cloth. Do not direct
the steam directly onto the electrical boxes.
ATTENTION :
Disinfection of cylinders, electrical boxes and remote controls with a microfibre wipe impregnated with disin-
fectant.
MONTHLY MAINTENANCE (AFTER CLEANING):
• Check that there is no visible damage to the unit.
• Check that no parts are missing.
• Check that the wheels are functioning properly and that no material is interfering with their running
(hair, carpet ends, etc.).
• Check that the controls are working properly and that the remote control and the actuator are
connected to the battery pack.
• Clean the sockets and control buttons with a dry cloth, if necessary with a damp cloth.
• Check the integrity of the electrical cables (cylinder and remote control).
• Never clean the appliance, especially the electrical system, with a high-pressure cleaner, water
hose or similar.
If you notice a malfunction, contact the Service Department:
Mobile Lifts & Verticals
Téléphone : 04 66 71 71 80
Fax : 04 66 71 71 81
Mail : sav@nausicaa-medical.com
Assembly Guide / Lifts : NAUSIFLY 3
54
Manufactured by NAUSICAA Médical S.A.S. / Approved by Ghizlane Labrosse (Biomedical Engineer)

Publicité

loading