Technical Specifications; Output Signal - Fracarro SIG7330 Instructions D'emploi

The Transponder is not
detected
The output video format is
not modified
Input connectors
Impedance
Output connectors
Transport Stream Input/Output connectors
Input frequency
Input level
Input return loss
Tuning step
AFC
Self-demixing input loss
Max. number of modules to demix at the
input
LNB remote power
DiSEqC
Symbol rate
FEC
Output connectors
Video Standard
Video Format
Video level
Audio Format
Audio Level
Programming
Showned infos
Power supply tension
Typical consumption
Operational temperature
Dimensions
Technical data is nominal values and refer to an operating temperature of 25° C
Digital Terrestrial Transponder
out of specified values
The output video format is the
same as the input

8. TECHNICAL SPECIFICATIONS

CONNECTORS
2 F (RF IN, RF OUT) connectors
75Ω
3 RCA (Video and Audio stereo) connectors
48 poles on the back panel
INPUT SIGNALS
950 - 2150MHz
35 - 85dBµV (@ 27.5Msym/s, FEC 3/4, S/N=12dB)
> 10dB
1 MHz
± 3MHz (@ 27.5Msym/s, -60dBm, S/N=10dB)
2dB max
Depends on the frequency and level of the input si-
gnal
0/14/18V, 0/22
1.0 (4 satellite)
1 – 40 Msym/s
Auto (1/2, 2/3, 3/4, 5/6, 6/7, 7/8)

OUTPUT SIGNAL

RCA Female
PAL, PAL-N, PAL-M, SECAM-L, NTSC-M
Adapted 16/9, Letterbox, Pan Scan, Combined
1Vpp typical @ 75Ohm
Mono, Mono Lang 1, Mono Lang 2, Stereo
550mVrms maximum
GENERAL
TPE
OSD Program list
220-240V ~ 50-60 Hz
11W (verified with 200mA@14V feed to LNB)
-10 - +45°C
35 x 130 x 240mm
Check with Field Analyzer the digital char-
acteristics of the Transponder
The output video format can be modified
only if a channel with 16/9 format is present
at the input. Otherwise, the output format
will be the same as the input format.
, 200mA 14V – 100mA 18V
kHz
27
.