Technical Specifications - Fracarro SIG7730 Instructions D'emploi

Input connectors
Impedance
IP output connector and programming
Input frequency
Input level
Input return loss
Tuning step
AFC
Gain of passage of self-demixing input
(47-86MHz)
Max. number of modules to demix at the
input
Carriers
Modulation
Hierarchy
Guard Interval
FEC
Output
MPEG information
Supported transmission protocols
Programming
Power supply tension
Max consumption
Operational temperature
Dimensions
GB: Technical data is nominal values and refer to an operating temperature of 5° C

9. TECHNICAL SPECIFICATIONS

CONNECTORS
INPUT SIGNALS
Depends on the frequency and level of the input
OUTPUT SIGNAL
Up to 1 digital encoded program in IP with single
ETSI TS10034 v.1.1.1 MPEGTS over UDP or
MPEGTS over RTP/UDP complian. PAT, PMT,
GENERAL
47
 F (TV IN, TV OUT) connectors
75Ω
1 RJ45 connector
174 to 30MHz / 470 to 86MHz
30 to 80dBµV (C/N 1dB)
8 dB typical
50 KHz
± 85KHz (K), ± 14KHz (8K)
+dB (ON condition)
- 0,5dB (OFF condition)
signal
K, 8K
QPSK, 16QAM, 64QAM
High/Low priority
1/4, 1/8, 1/16, 1/3
1/, /3, 3/4, 5/6, 7/8, auto
multicast address
Available MPEG information
SDT recovered tables.
TPE e PC
0-40V ~ 50-60 Hz
8W
-5 to +45°C
35 x 130 x 40mm