Pfannenberg PWS 6502 T Serie Manuel D'utilisation page 41

GB
3.3 Unpacking
WARNING
Danger of accidents due to the heavy weight of the units
Uncontrolled movements of the units during assembly can cause accidents.
➢ Use suitable lifting equipment and secure units to prevent accidents.
➢ Also secure assembled components.
CAUTION
Danger of injury due to sharp edges
➢ For manufacturing reasons, the metal edges of the unit may have burrs.
➢ Wear gloves during service and assembly work.
▪ Perform a visual inspection for transport damage when unpacking the air/water heat exchangers.
Take note of any loose parts, dents, scratches, visible loss of oil etc.
▪ Inspect the packaging material for any loose functional parts before disposal.
 Reported any damages to the freight carrier immediately. Observe the "Terms for Cases of Damage".
 Precise information about defects, including possible photos must be provided for the handling of warranty
claims. Always specify the type designation and serial number.
 The "General Terms for Deliveries and Services" of ZVEI (Zentralverband der Elektrotechnischen Industrie;
Central Association of the Electrical Engineering and Electronics Industry , in Germany) according to the latest
revision apply.
Operating manual PWS and PWI 6502 T 785408480 © Pfannenberg GmbH Page 10 / 31