Publicité
Les langues disponibles
Les langues disponibles
WARNING
Make sure all terminals of the components
are firmly connected before you close the
cover of the electric control box. Before you
power on and start the unit, check that the
cover of the electric control box is tight and
secured properly with screws. Do not let any
liquid spill into the electric control box, and do
not touch the components in the box with wet
hands.
The
appliance
shall
accordance with national wiring regulations.
If the supply cord is damaged, it must be
replaced by the manufacturer or its service
agent or a similarly qualified person in order
to avoid a hazard.
An all-pole disconnection switch having a
contact separation of at least 3mm in all
poles should be connected in fixed wiring.
The dimensions of the space necessary for
correct installation of the appliance including
the
minimum
permissible
adjacent structures.
The temperature of refrigerant circuit will be
high, please keep the interconnection cable
away from the copper tube.
NOTE
Do not install the power cord near equipment
that
is
susceptible
to
interference, such as TV, and radios to
prevent interference.
Use a dedicated power supply cord for the
unit. Do not share the same power source
with other equipment. A fuse or circuit
breaker must be installed, and these must
conform to the local law.
INFORMATION
i
The installation manual is only a general guide
on the wiring and connections, and is not
specifically designed to contain all information
regarding this unit.
1.2 Notice to Users
If you are uncertain on how to run the unit, please
contact the installation personnel.
This unit is not suitable for people who lack physical
strength, cognitive sense or mental ability, or who
lack experience and knowledge (including children).
For their own safety, they should not use this unit
unless they are supervised or guided by the
respective personnel in charge of their safety.
Children must be monitored to ensure that they do
not play with this product.
be
installed
in
distances
to
electromagnetic
12
WARNING
To prevent electric shock or fire:
Do not wash the electric box of the unit.
Do not operate the unit with wet hands.
Do not place any items that contain water on
the unit.
NOTE
Do not place any object or equipment on top
of the unit.
Do not sit, climb, or stand on the unit.
2 PACKING BOX
2.1 Overview
This chapter mainly introduces the subsequent
operations after the outdoor unit has been delivered to
site and unpacked.
This specifically includes the following information:
Unbox and handling the outdoor unit.
Take out the accessories of the outdoor unit.
Dismantle the transport rack.
Remember the following:
At the time of delivery, check the unit for any damage.
Report any damage immediately to the carrier's claim
agent.
As far as possible, transport the packaged unit to its
final installation site to prevent damage during the
handling process.
Take note of the following items when transporting
the unit:
Fragile. Handle with care.
Keep the unit with its front facing upwards so
as not to damage the compressor.
Select the unit transportation path in advance.
2.2 Transport
Hoisting method
Wrapped
Please hoist in packaged or protected condition,and
do not remove any packaging before hoisting.
Fig.2.1
V.1
Publicité
