Publicité
Les langues disponibles
Les langues disponibles
WARNING
When the fuse melts, do not use any
unspecified fuse or other wire to replace the
original fuse. The use of electrical wires or
copper wires may cause the unit to
malfunction or cause a fire.
Do not insert fingers, sticks, or other items
into the air inlet or outlet. Do not remove the
fan mesh cover. When the fan rotates at a
high speed, it may cause bodily injury.
It is very dangerous to check the unit when
the fan is rotating.
Make sure you turn off the main power switch
before any maintenance work begins.
Do check the supporting and base structure
of the unit for any damages after a long
period of use. The unit may drop and cause
personal injury if there is any damage.
6.1 Maintenance After the Unit Has
Been Shut Down For a Long
Period
For example, in early summer or winter.
Check and remove all objects that may clog the air
inlets and outlets of the indoor and outdoor units.
Clean the air filter and external shell of the unit.
Please contact the installation or maintenance
personnel. The installation/operation manual of the
indoor unit includes maintenance tips and cleaning
procedures. Make sure that the clean air filter is
installed in its original position.
Turn on the main power supply 12 hours before this
unit is operated in order to ensure that the unit runs
smoothly. The user interface is displayed once the
power is turned on.
6.2 Maintenance Before the Unit Is
Shut Down for a Long Period
For example, at the end of winter and summer.
Run the indoor unit in the fan mode for about half a
day to dry the internal parts of the unit.
Turn off the power supply.
Clean the air filter and external shell of the unit.
Please contact the installation or maintenance
personnel to clean the air filter and external shell of
the indoor unit. The installation/operation manual of
the specialized indoor unit includes maintenance tips
and cleaning procedures. Make sure that the clean
air filter is installed in its original position.
6.3 About The Refrigerant
This product contains fluorinated greenhouse gases as
stipulated in the Kyoto Protocol. Do not discharge the
gas into the atmosphere.
Refrigerant Type: R410A
GWP Value: 2088
Based on the applicable law, the refrigerant must be
checked regularly for leakages. Please contact the
installation personnel for more information.
WARNING
The refrigerant in the air conditioner is
relatively safer, and usually does not leak. If
the refrigerant leaks, and comes in contact
with burning objects in the room, it will
produce harmful gases.
Shut down any flammable heating device,
ventilate the room and contact the agent of
the unit immediately.
Do not use the air conditioner again until the
maintenance personnel has confirmed that
the refrigerant leakage has been sufficiently
resolved.
6.4 After-sales Service and
Warranty
6.4.1 Warranty period
This product contains the warranty card that was
completed by the agent during installation. The customer
must check the completed warranty card and keep it
properly.
If you need to repair the air conditioner during the
warranty period, please contact the agent and provide
the warranty card.
6.4.2 Recommended maintenance and
inspection
As the use of the unit for many years will eventually lead
to a dust layer, the performance of the unit will
degenerate to a certain extent.
As professional skills are needed to dismantle and clean
the unit, and for the optimal maintenance effects of this
unit, please contact your agent for more details.
When you request the agent for assistance, please
remember to state:
Complete model name of the air conditioner.
Date of installation.
Details on the fault symptoms or errors, and any
defects.
WARNING
Do not attempt to modify, dismantle, remove,
reinstall or repair this unit, as the improper
dismantling or installation may result in
electric shock or fire. Please contact the
agent.
If the refrigerant accidentally leaks, make
sure that there is no fire around the unit. The
refrigerant itself is completely safe, non-toxic
and non-flammable, but it will produce toxic
gases when it accidentally leaks and comes
in
contact
with
generated by existing heaters, and burning
devices in the room. You must get a qualified
maintenance personnel to verify that the
point of leakage has been repaired or
rectified before you restore the operations of
the unit.
04
flammable
substances
V.1
Publicité
