Brill MS 326 B Manuel D'utilisation page 14

en
ORIGINAL USER INSTRUCTIONS
Contents
About this handbook........................................ 14
Product description.......................................... 14
Technical data..................................................15
Safety instructions............................................15
Assembly.......................................................... 16
Fuel and Operating fluids.................................16
Startup.............................................................. 17
Operation..........................................................17
Maintenance and care..................................... 19
Storage............................................................. 20
Recommissioning............................................. 20
Disposal............................................................20
Troubleshooting................................................20
Warranty........................................................... 21
EC declaration of conformity............................21
ABOUT THIS HANDBOOK
Read this documentation before starting up
the machine. This is a precondition for safe
working and flawless operation.
Observe the safety warnings in this docu-
mentation and on the product.
This documentation is a permanent integral
part of the product described and must be
passed on to the new owner if the product is
sold.
Explanation of symbols
CAUTION!
Following these safety warnings care-
fully can prevent personal injury and/or
material damage.
Special instructions for greater ease of
understanding and improved handling.
PRODUCT DESCRIPTION
This documentation describes a hand-held scythe
with a petrol engine.
14
Symbols on the machine
Caution! Special care required during
use.
Read the operating instructions before
start-up.
Wear safety goggles, safety helmet,
ear defenders.
Wear gloves.
Wear safety shoes.
Keep body and clothing away from cut-
ting parts.
Danger due to ejected objects!
The distance between the device and
15m(50ft)
other persons must be at least 15 m.
Product overview
see Figure 1
1 Cutting blade
2 String head
3 Guard
4 "Bike" grip
5 Gas lever
6 Engine ON / OFF switch
7 Gas lever lock
8 Shoulder strap
9 Air filter shroud
10 Petrol tank
11 lever "Choke / Run"
12 Primer (cold-start)
Original user instructions
MS 326 B