Publicité
Les langues disponibles
Les langues disponibles
MAINTENANCE
Removing the grease filters
Replacing the carbon filter
The carbon filter must always be used if the cooker hood is not ducted.
1. Open the panel.
2. Remove the grease filters.
3. Fit the carbon filter by wedging it into the casing.
4. Replace the grease filters.
Note:
Saturation of the activated charcoal will eventually occur after more or less prolonged
use, depending on the type of cooking and how frequently the grease filter is cleaned.
In all cases it is necessary to replace the cartridge at least every four months.
DO NOT wash or reuse the carbon filter. Saturated carbon is not environmentally friendly,
change the filter regularly.
Lighting
This hood is fitted with a light system. This light system has to be replaced by an
authorized technician. Do not attempt to replace it by yourself.
The lamp in this household appliance is only suitable for illumination of this
appliance. The lamp is not suitable for household room illumination.
EN 12
Switch off the electricity! Remove the plug from the socket or switch the
electricity off at the mains. Open the panel and pull the special handle
to remove the filter.
Publicité
