Publicité
Les langues disponibles
Les langues disponibles
REVERSING THE DOOR
IMPORTANT: THIS OPERATION REQUIRES AT LEAST 2 PERSONS.
INSTRUCTIONS
1. Open the door at a 90 degree angle, take out 2 screws from lower door axis (2), and
remove the axis plate and door.
2. Set the door aside in a safe place and unscrew the 3 screws from top right hinge (4) and
take out the right top hinge.
3. Remove the decorative nails (8) from left top of cabinet and install the spare top left hinge
(9) at left top of cabinet using the 3 screws.
4. Rotate the door 180 degrees, then re-installed it the same way it was removed making
sure it is aligned properly (9)
5. Block the hole at right top of cabinet with the spare decorative nails.
25
Publicité
