AVG NOIRE BSC46DB Manuel D'utilisation page 22

3. OPERATING YOUR APPLIANCE
OPERATING CONDITIONS
Proper operation of the appliance is guaranteed only if the following conditions are met:

The temperature in the room where the appliance is located conforms to the climate
class stated on the appliance's rating label.

Maximum ambient relative humidity: RH75%.

The appliance must be placed at a sufficient distance from heat sources ( e.g., ovens,
central heating, direct sunlight, etc.).

The appliance must be located in such a place that it is protected against the effects of
weather.

Regular maintenance is performed according to the instructions in this user's manual.

The ventilation openings on the appliance must not be covered.

Correct installation (e.g. leveling, the capacity of the system corresponds to the
specifications on the rating label of the appliance).
COMMANDS

"
" button to turn the unit ON and OFF, press and hold this button for approximately
3 seconds.

" " button Energy conservation button: Pressing this button for 3 seconds will turn
the energy conservation mode ON or OFF. In this mode, the LED light and display will
turn off, and the °C/°F light will be on.

" " indicator light: shows that the compressor is in operation.

" " button: used to increase (warm) the temperature in steps of 1°F (or 1°C).

" " button is used to decrease (cool) the temperature in steps of 1°F (or 1°C).

"°C/°F" button : press this button to switch the indicator light between° C/°F.

" " button: turns the interior light ON and OFF. If you use this button, the light is no
longer controlled by the switch, and remains ON.(Light button deactivated when Energy
conservation button is on) LED display Display screen shows the temperature setting.
22