3 - PROGRAMMING
You washing machine can automatically optimise the
length of the wash cycle and the water and energy
consumption of every wash.
- Adjustment to the quantity of laundry:
Washing 1kg of laundry is not the same as washing
a full load, which is the reason why your washing ma-
chine is equipped with sensors that detect the quan-
tity of laundry in the drum and automatically calculate
the right levels of water and energy required to pro-
duce a perfect wash.
- Adjustment to the hardness of the water:
The hardness of the water in your mains supply affects
the wash and rinse performances of your appliance,
which is the reason why your washing machine auto-
matically adapts the tumble time and the number of
rinses to produce a perfect result.
The water hardness is adjusted when you use your
washing machine for the first time (see special insert).
fr -francais
4 - REGULAR CARE
4.1 - A
VOIDING BAD SMELLS
Respect the installation instructions for the drain hose
described in paragraph 1.3, leave the lid open after the
cycle has finished. Complete an empty cycle with a
washing agent at 60°C or 90°C once a month.
4.2 - P
RODUCT DRAWER (Diagram 4.1)
— Release the drawer by pressing the Bumps
it towards you. Remove the siphon
C
drawer
from the trim
— Rinse everything under the tap.
— Refit all of the parts of the drawer, then fit it back
under the lid of the machine.
4.3
E
-
XTRACTING FOREIGN BODIES FROM THE
FILTERS AND REGULARLY CHECKING THEM
Checking the filters is recommended once a year to
ensure that the washing machine functions correctly.
To do this,
- Unplug your washing machine
- Close the water tap.
W
ATER INLET FILTER
- Unscrew the water inlet hose from the tap; check
the filter at the end of the hose. Remove any detritus;
clean the filter with a brush if necessary. Screw the
water inlet hose back onto the tap.
EN
(continued)
A
B
, separate the
D
.
- Adjustment to the type of textile:
Cotton shirts and cashmere pullovers do not demand
the same wash, which is the reason why your washing
machine adapts its tumble speed to each type of tex-
tile.
P
UMP FILTER (Diagram. 4.2)
— Unlock part
sing a pencil into hole
- Remove any small objects that may have fallen
between the drum and the tank.
- Turn the drum forwards.
— Remove the pump filter
may be present, and rinse in water
, pull
— Reposition parts
— Push part
A
After you have finished checking:
- Open the water tap.
- Reconnect your washing machine.
4.4 - O
UTSIDE PANELS
Do not use abrasive products or scourers. Use liquid-
soap. Dry with a soft cloth.
4.5 - L
IMESCALE PREVENTION
If the water in your region is particularly hard, using
a washing machine de-scaling product is recom-
mended.
Regularly check the drum for scale. If necessary, run
a wash cycle with the drum empty and a de-scaling
product, referring to the instructions on the product
packaging.
22
at the bottom of the drum by pres-
A
while pushing to the right.
B
, remove any objects that
C
and
;
C
A
to the left until it clicks into place.