Brandt BT16524VE Manuel D'instruction page 19

3 - PROGRAMMING
3.2 - P
ROGRAMMING A WASH CYCLE
S
TARTING THE APPLIANCE
Press the "On/Off" button
The ECO 40-60 program is automatically selected
when you turn on your washing machine.
Choose your washing program by turning the selector
.The machine displays the temperature and spin
3
speed best suited to the chosen program as well as
the cycle time.
If you wish, you can change the temperature by pres-
successively (Diagram 3.2.1).
sing key
6
Nota : For a cold wash, change the temperature to
«0».
Using key you may:
7
- modify the spin speed (automatic limit for certain
programs) (Diagram 3.2.2)
- choose drip dry (Diagram 3.2.3). The cycle will end by
draining the washing machine and will not spin.
- or stop with the drum full (Diagram 3.2.4).
You can select any options using keys
The led corresponding to your selection switches on.
A warning beep informs you of any options that are
not compatible with your program.
Press «Start/Pause» 2
The door lock indicator
A few minutes after the cycle is launched, the duration
is updated according to the quantity and type of laun-
dry in the machine.
D
ELAYED START OF A PROGRAM
Select your program.
Press the «Delayed start» key
your program hour by hour until you reach the time
you want (max 24h).
Confirm your cycle selection by pressing the «Start/
Pause» button .
2
In all cases, an animation materializes the waiting pe-
riod preceding the start of the cycle.
Area of the display shows the time remaining until the
start of the program via a countdown in hours, then in
minutes during the last hour.
A
DDING OR REMOVING AN ITEM DURING THE
CYCLE (impossible during spin)
Press and hold the «Start/Pause» button
rupt the program.
The time remaining flashes and the door lock indica-
tor goes out.
12
Insert or remove the linen.
The time taken to unlock the door depends on
the temperature inside the machine and can
last up to several minutes for safety reasons.
(continued)
1 .
and
4
to start your program.
lights up (Diagram 3.2.5).
12
8 to delay the start of
to inter-
2
Press «Start/Pause»
The countdown resumes.
Nota : If you have selected a delayed start, you can
open the drum at any time before the wash program
starts.
C
ANCELLING A PROGRAM
Press and hold the «On/Off» button
All the lights go out.
You can do this at any time: during the cycle, pro-
gramming or during a pause.
Nota : In all cases, cancelling a program means that
you have to re-program everything from the start
again (see paragraph 3.2) and a partial emptying is
carried out.
Information :
In the event of a power cut, the cycle will automati-
.
9
cally restart from the point where it stopped, as soon
as the power returns.
E
ND OF THE WASHING CYCLE
The display shows «Stop» (Diagram 3.2.6) and the
door lock indicator
end of the program.
You can program a new cycle without having to press
the «On/Off» key
This display is automatically switched off after a
maximum of 5 minutes in order to save energy in
standby mode.
Open the lid and remove the linen.
Certain models are equipped with a function that
automatically places the drum opening at the top, at
the end of the cycle, to facilitate access to the laundry.
This operation may take up to 3 minutes which adds
onto the wash cycle time.
Press and hold the «On/Off»
the washing machine.
C
HILD SAFETY
Activate «Child safety» to lock your program by pres-
sing button
4
light corresponding to the
(Diagram 3.2.7).
Simultaneously press the same buttons again to
switch off the «Child safety» function.
19
2
to restart the program.
1
goes out. A beep indicates the
12
.
1
1 button to switch off
. Once this safety device is active,
symbol ,comes on
.
EN