Gaggenau 400 Serie Notice D'installation page 15

Move the template 9.4" (240 mm) from the line A. Draw
another line and mark the dots at II.
Figure 28
Make pilot holes with a hammer and a center punch. Use a
drill to drill 2/3 way through the panel.
Figure 29
in
Attaching the Mounting Brackets
Attach the mounting brackets to the panel with screws
provided. Attach by hand with screwdriver; do not use a
power drill.
Figure 30
T
D
Figure 31
⁄ in
(2 mm)
⁄ in
(2 mm)
15