Put time card (green) on the receiver, after
one acoustic signal ("beep") the display will
show "P_ED", that means date and time are
set successfully.
WARNING
Place the time card (green) on the receiver. If this doesn't happen it is necessary to press again the
* button, place the Owner Key (red) on the receiver and then place the time card (green).
DATA FILING
To file data on the computer it is necessary to transfer them from the Safe, with the data card
(yellow). This file can contain a maximum of three hundred openings.
For the transfer procedure proceed as follows.
Type on the Safe keypad the * button and place
the Owner key on the receiver.
An acoustic signal ("beep") will confirm that it
has been recognised.
Owner Key
or Master Key
Owner Key
or Master Key
35
Receiver
Receiver