Indel B SAFE TOP OPEN PLUS SMART Mode D'emploi page 29

INSTRUCTIONS FOR USE
The Safe appears to the user with its door open and ready for use.
CLOSE AND OPEN
Use the keypad code to open
1. To close the Safe the user must keep the door pressed and type on the keypad a 4 to 9 digits
code followed by the # key. This code can be composed by zero to nine digits, at user's discretion
2. To open the Safe user just need to type the same code, again followed by the # key. While
the code is set, if a wrong digit is typed, press the * key to cancel it and insert the right code.
It is possible to change the secret code every time the safe box is unlocked
Door
WARNING! If the user forgets the code and the Safe is closed, or if the user leaves the room and
the Safe is closed, it is possible to open the Safe using the Owner Key, the Master Key or the
mechanical key.
Use IB card to open
If the user forget the personal code and the safe box is closed, there is the possibility to open it
using the Owner Key or the Master Key proceeding as follows.
Place on the receiver the Owner Key or the Master Key; an acoustic signal ("beep") sound and the
display show "OPEN" and the Safe is opening.
Keypad
Receiver
Owner Key
or Master Key
27
Receiver