Indel B SAFE TOP OPEN PLUS SMART Mode D'emploi page 27

MODE 1
INITIALIZATION ELECTRONIC LOCK (MODE 1 - MODE 2)
This operation is required only for Safe already used and initialized. It is not necessary with new
Safe, just purchased and installed.
Press reset button, the display will show "RESET" with three acoustic signals, that means the Safe
initialization is been completed and the keys and codes memorized have been cancelled.
OWNER KEY
The Owner Key is the "mother" key necessary for the configuration of the Safe and its opening in
case of emergency.
SET OWNER KEY (MODE 1 - MODE 2)
1. To set owner key, safe box must be unlocked and the initialization has been done, Put the first
IB key on the receiver, after one acoustic signals ("beep") the IB key becomes the Owner Key.
2. Each Safe only one Owner Key will be set.
SAFE OPENING WITH THE OWNER KEY
Place on the receiver the Owner Key; an acoustic signal ("beep") sound and the display show
"OPEN" and the Safe is opening.
OWNER KEY ERASURE
Press the RESET button (see Instruction for Use chapter), after three beeps the Owner Key will be
erased.
Owner Key
or Master Key
25
Receiver