Indel B SAFE TOP OPEN PLUS SMART Mode D'emploi page 32

SAFE TOP OPEN PLUS SMART
MODE 2: OPEN SAFE BY IB KEYS + CORRESPONDING PIN CODE
ALL DATA IN MODE 1 ARE VALID IF NO INITIALIZATION EVER DONE
1. The IB key to be activated will become the OWNER key: it's the highest authority key. The owner
key can be used to program and open SAFE. If the owner card is lost, initialization is the only way to
program again the SAFE.
2. MODE SWITCH/ACTIVATE:
If under mode 1: *0# + Owner key → LCD displays "Mode 2", means success to activate mode 2;
If under mode 2: *0# + Owner key → LCD displays "Mode 1", means success to activate mode 1;
* 0
3 BEEP
• Initial factory setting MODE is Mode 1.
3. PIN code setting/amend for OWNER KEY
* 3
2 BEEP
AMEND
1. Press *1# + place "Owner key" on the receiver: lights will flash for 4sec;
2. While lights keep flashing enter new PIN code followed by #: LCD will display "rEPE";
3. Enter again new PIN code followed by #: LCD shows "Succ";
4. PIN CODE will update to new one.
* 1
2 BEEP
• For setting and amend PIN code, if second time pin code entered is not same as first time, LCD display
"ERROR";
4. PIN code set/amend for MASTER KEY
Setting
1. Press *2# + place "Owner key" on the receiver: LCD will display ID of master key "ID (1-5)" and lights will
flash for 4sec;
2. While lights keep flashing enter PIN code followed by #: LCD will show "rEPE";
3. Enter again PIN code followed by #: LCD display "Succ";
4. PIN CODE will update to new one.
* 2
LCD display "ID (1-5)" 2 BEEP
SAFE TOP OPEN PLUS SMART_IM_20220121
# Place the owner key
Place the
#
ownerkey
Place the
#
owner key
Place the
#
owner key
Pin code (4-6 Pin code (4-6
digits)+#
New pin code New pin code
(4-6 digits)+# (4-6 digits)+#
New pin code New pin code
(4-6 digits) + # (4-6 digits) + #
30
Mode switch/activate
Pin
digits)+# code
Pin
code
Pin
code