Publicité
Les langues disponibles
Les langues disponibles
6.4 HEIGHT ADJUSTMENT INSTRUCTIONS
CAUTION: Do not at any time make any adjustment to scarifier without first stopping the engine .
Your scarifier is equipped with a depth adjustment lever offering a Unlimited working positions.The working
positions are -3mm, -6mm, -9mm, -12mm, -15mm height.
1. Stop mower and disconnect spark plug cable before changing mower cutting height.
2. To change the height of cut by turn the front knob clockwise rotation or
3. Move transport lever to transport position to prevent cutter deck from touching the ground after finish work.
Blade UP
Fig.10A
Blade Down
Fig.10B
14 - EN
negative rotation
to selected height.
Publicité
