ROQUES LECOEUR RL340 Manuel D'utilisation page 34

6.1 TO START ENGINE
1. Before starting engine, please turn the engine switch to the "ON" position. (Fig.7A)
3. To start a cold engine, move the Carburetor lever to the "on" position (Fig. 7B). keep the choke lever stay To
the "off" position (Fig. 7B).
4. Standing behind the unit, grasp the brake control handle and hold it against the Lower handle. (Fig. 7C)
5. Keep hold the brake lever as shown Fig.7C and Grasp the starter handle as shown Fig 7D pull up rapidly.
Return it slowly to the rope guide bolt after engine starts.
6. Move the choke lever to the "on" position. (Fig.7F)
Note! When the cutter deck is in contact with the ground, the unit can move.
Fig.7A
Fig.7D
Carburetor lever
Fig.7B
choke lever
Fig.7E
12 - EN
Grasp the brake
lever
Fig.7C