5. ASSEMBLY
5.1 FOLDING HANDLE
1. Fix the lower handlebar into the unit body with blots, washers and locking knobs. (Fig. 2A/Fig.2B/Fig.2C)
2. Connect the lower handlebar and upper handlebar with blots, washers and locking knobs.
(Fig.2D/Fig.2E/Fig.2F)
3. Attach the cable-clamps to the position shown and then attach the cable. (Fig.2G)
Locking knob
Bolt
Washer
Fig.2A
Fig.2B
Fig.2C
Washer
Bolt
Locking knob
Fig.2D
Fig.2E
Fig.2F
Cable Clamp
Fig.2G
9 - EN