BorMann Pro BBP2005 Mode D'emploi page 3

EN
Removing The Battery
- After completion of charging, the battery charge status indicator light will turns to green to indicate that charging is completed.
- Disconnect the charger from the main socket after charging.
- Pull the battery out of its holder in the device.
Maintenance And Cleaning
Maintenance
- In order to avoid safety hazards, if the power supply cord needs to be replaced, this must be done by Bormann or by a customer service centre that is author-
ised to repair Bormann power tools.
Cleaning
- Carefully remove any dirt that may be adhering to parts.
- Clean the air vents carefully with a dry brush.
- Use only a slightly damp cloth to clean the casing. Do not use cleaning agents containing silicone as these may attack the plastic parts.
Disposal
Chargers, accessories and packaging should be recycled in an environmentally friendly manner.
Do not dispose of chargers along with household waste.
Only for EU countries:
According to the European Directive 2012/19/EU on Waste Electrical and Electronic Equipment and its implementation into national law,
chargers that are no longer usable must be collected separately and disposed of in an environmentally friendly manner.
3
WWW.NIKOLAOUTOOLS.GR