Publicité
Les langues disponibles
Les langues disponibles
Problem
Water drips from the
nozzle when STEAM
CARE starts.
Sprayed water is not
visible during STEAM
CARE.
Drying takes too long.
If a problem persists, contact a local Samsung service center.
DV3000A(SEM)_DC68-03784P-00_EN.indd 47
Action
• This is steam condensation. The dripping water will stop after
a short time.
• Sprayed water is difficult to see when the door is closed.
• Sensor Dry automatically senses the moisture in the load
and shuts the dryer off when the selected dryness level is
reached.
The drying time can change according to the type and
amount of laundry. See the cycle chart for reference.
English 47
2020-12-07
4:51:01
Publicité
