Samsung WA40A3A Serie Mode D'emploi page 238

Troubleshooting
Problem
Items are unevenly
dried.
The dryer smells.
There is lint on
clothes.
Items are still
wrinkled after
WRINKLE PREVENT
(WRINKLE-CARE,
WRINKLE RELEASE)
process.
46 English
DV3000A(SEM)_DC68-03784P-00_EN.indd 46
Action
• Seams, pockets, and other similarly heavy areas may not
be completely dry when the rest of the load has reached
the selected dryness level. This is normal. You can choose
a higher dryness level or a cycle that involves a higher
dryness level.
• If one heavy item is dried with a light load, such as one towel
with sheets, the heavy item might not be completely dry
when the rest of the load has reached the selected dryness
level.
• For the best drying results, dry heavy items and light items
separately.
• Household odors from paint, varnish, strong cleaners, etc.
may enter the dryer with the surrounding room air. This is
normal as the dryer draws the air from the room, heats it,
pulls it through the drum, and exhausts it outside.
• When these odors linger in the air, completely ventilate the
room before using the dryer.
• Use a cycle featuring the Refresh function. If odors persist,
wash and dry the item again.
• Make sure to clean the lint filter before every load. For
clothes that naturally build up lint, clean the filter during the
cycle.
• Some fabrics are lint producers (for example, a fuzzy white
cotton towel) and they must be dried separately from clothes
that are lint trappers (for example, a pair of black linen
pants).
• Divide larger loads into smaller loads for drying.
• Check pockets thoroughly before drying, then dry clothes.
• Remove lint inside the drum before drying.
• Small loads of 1 to 4 items work best.
• Load fewer items. Load similar-type items.
• Take out the items immediately after drying is complete.
2020-12-07 4:51:01