Salicru EQUINOX EQX2 100010-T Mode D'emploi page 53

3. QUALITY ASSURANCE
AND STANDARDS
3.1. MANAGEMENT STATEMENT
Our aim is to satisfy our customers. Management has established
a Quality and Environmental Policy for such purposes. As a re-
sult, a Quality and Environmental Management System will be
implemented, which will ensure that we are compliant with the
ISO 9001
requirements of the
we meet all customer and stakeholder requirements.
The company management is also committed to the development
and improvement of the Quality and Environmental Management
System, through:
Communication to the entire company of the importance of
•
meeting both the customer's requirements, and legal and
regulatory requirements.
Dissemination of the Quality and Environmental Policy and
•
setting of the Quality and Environment targets.
Management reviews.
•
Provision of the necessary resources.
•
3.2. STANDARDS
The product is designed, manufactured and marketed in accordance
ISO 9001
with the Quality Assurance standard. The
indicates conformity with the EEC Directives through application
of the following standards:
2014/35/EU. - Low voltage directive.
•
2014/30/EU directive - Electromagnetic compatibility -CEM-.
•
2011/65/EU. - Restriction of hazardous substances in electrical
•
and electronic equipment (RoHS).
2012/19/EU. - Waste electrical and electronic equipment
•
(WEEE).
Grid connection laws in Spain:
Royal Decree RD647/2020, which regulates aspects
•
necessary for the implementation of the grid connection codes
of certain electrical installations.
Royal Decree RD244/2019, which regulates the administra-
•
tive, technical and economic conditions of self-consumption of
electrical energy
According to the specifications of the corresponding harmonised
Reference standards:
standards.
Electrical safety:
IEC/EN/UNE 62109-1:2010. Safety of power converters
•
for use in photovoltaic power systems. Part 1: General
requirements.
IEC/EN/UNE 62109-2:2011. Safety of power converters
•
for use in photovoltaic power systems. Part 2: Particular
requirements for inverters.
USER MANUAL
ISO 14001
and standards and that
mark
Electromagnetic compatibility:
IEC/EN/UNE 61000-6-2:2005. Electromagnetic compatibility
•
(EMC). Part 6-2: Generic standards. Immunity in industrial
environments.
IEC/EN/UNE 61000-6-3:2007/A1:2011. Electromagnetic
•
compatibility (EMC). Part 6-3: Generic standards. Emission
standard for residential, commercial and light-industrial
environments.
Efficiency:
IEC/EN/UNE 61683:1999. Photovoltaic systems. Power
•
conditioners. Procedure for measuring efficiency.
Environment:
IEC/EN/UNE 60068-2-1:2007 / IEC/EN/UNE 60068-2:2007 /
•
IEC/EN/UNE 60068-14:2009 / IEC/EN/UNE
Environmental tests. Cold/Dry heat/Temperature changes/
Cyclic heat.
Grid connection:
IEC/EN/UNE 62116:2014. Utility-interconnected photovoltaic
•
inverters. Test procedure of islanding prevention measures.
IEC 61727:2004. Photovoltaic (PV) systems - Characteristics
•
of the utility interface.
(EU) 2016/631 Commission Regulation of 14 April 2016
•
establishing a network code on requirements for grid
connection of generators.
Only for installations in Spain :
UNE 217002:2020. Inverters for connection to the distribution
•
network. Testing of requirements for DC grid injection,
overvoltage generation and island operation detection system.
UNE 217001:2020. Tests for systems intended to avoid the
•
energy transmission to the distribution network.
NTS631. Technical note on compliance supervision for
•
electricity generation modules according to regulation
(EU) 2016/631.
The manufacturer shall not be held responsible for any
damage caused by the user altering or tampering with the
unit in any way.
The EC declaration of conformity for the product is
available for the customer and can be requested from our
head office.
3.3. ENVIRONMENT
This product has been designed with the protection of the
environment in mind and has been manufactured in accordance
ISO 14001
with the standard.
Recycling the unit at the end of its useful life:
Our company commits to using the services of approved companies
that comply with the regulations in order to process the recovered
product at the end of its useful life (please contact your distributor).
Packaging:
To recycle the packaging, follow the applicable legal regulations,
depending on the particular standards of the country where the
unit is installed.
60068-30:2005.
EQX2 SOLAR INVERTERS CONNECTED TO THE GRID
53