Publicité
Les langues disponibles
Les langues disponibles
Butler 132/137
4.11 Out of range warning
When the handset is out of the working range of the base unit during a
conversation, the unit will emit a warning signal every two seconds to
warn the user that he has to move closer towards the base unit. If the
user is not in the working range of the base unit within 10 seconds, the
connection will be broken.
4.12 Flash button (R)
When you press the R button, also called flash or recall, the unit generates
a line interruption. It gives you the possibility to use the special services of
your telephone provider and/or to transfer calls when you have a telephone
e x c h a n g e .
4.13 Activate/deactivate key tones
• Press the Set button.
• Press numerical button '1'.
• P ress numerical button '1' again to activate/deactivate this function.
• Press the Memory button. The unit emits a confirmation tone.
Default setting : key tones activated.
4.14 Setting the ring melody
• Press the Set button.
• Press numerical button '2'.
• Select the desired ring melody (1-4).
• Press the Memory button. The unit emits a confirmation tone.
Default setting : ring melody 2
4.15 Setting the ring volume
• Press the Set button.
• Press numerical button '3'.
• Select the desired ring volume (off, low, high) by pressing numerical
button 1 re p e a t e d l y.
• Press the Memory button. The unit emits a confirmation tone.
Default setting : ring volume high
4.16 Automatic answering
It is possible to program the unit in such a way that, when you receive a
call, you only have to pick up the handset to connect directly to the
external caller. It is no longer necessary to press the Line button first to
accept the call.
• Press the Set button.
• Press numerical button '4'.
26
Publicité
