Publicité
Les langues disponibles
Les langues disponibles
The body of the appliance and the stand should be cleaned with a damp cloth.
Do not let water enter the appliance or the stand.
Do not use bleach or other abrasive substance or solvents to clean your
appliance as it can be damaging to the finish.
Do not immerse the appliance in water or any other liquid, or hold it under a
running tap to clean.
To remove stubborn spots/marks, wipe the surfaces with a cloth slightly
dampened in soapy water or mild non-abrasive cleaner. Rinse and dry a clean,
dry, soft cloth.
After using, lift the iron with the filling hole downwards to empty the remaining
water from the Water tank.
Insert the plug into the socket, and set the Temperature Control Dial to "MAX" for
1-2 minutes to evaporate the remaining water, and then unplug the iron and let it
cool down before storing it.
SELF-CLEANING
The iron needs to be self-cleaned every 10-15 days:
Push the steam control turning knob (C) to "O" position.
Set the temperature control dial (I) in "MAX" position and plug the power plug in
until the pilot light (G) lights up.
Unplug the power plug, and hold the iron over a sink or basin immediately.
Hold the self-cleaning button (L), the water will drip down from the steam spray
holes in the soleplate.
After the water tank is empty and no more water drip down, put the iron on a
shelf until it is dry.
STORING THE APPLIANCE
Unplug the unit from the wall outlet and clean all the parts as instructed above.
Ensure that all parts are dry before storing.
Store the appliance in its box or in a clean, dry place.
Never store the appliance while it is still wet or dirty.
Never wrap the power cord around the appliance.
All manuals and user guides at all-guides.com
7
Publicité
