Gaggenau VG 295 150 CA Notice D'utilisation page 14

en-us
Getting to know your appliance
Individual parts of the burner
Ensure that the individual parts of the burner are fitted in
the correct position and are straight; otherwise, this may
result in ignition problems or problems during operation.
Ensure that the burner head and burner ring fit so that
the locking catches on the bottom of the burner snap into
the appropriate recesses. The direction of burner head
and burner ring doesn't matter.
Note: If the burner parts are fitted at an angle, the
appliance will not work.
Individual parts of the standard-output burner and
high-output burner
(
Burner cap
0
Burner ring
8
Burner head
@
Ignition plug
H
Thermocouple
14
Individual parts of the wok burner
Ensure that the individual parts of the wok burner are
fitted in the correct position and are straight; otherwise,
this may result in ignition problems or problems during
operation. Fit the burner head such that the
thermocouple is positioned in the corresponding recess
on the burner head. The lug on the burner ring must
engage in the corresponding recess on the burner head.
Note: If the burner parts are fitted at an angle, the
appliance will not work.
(
Burner cap
0
Burner ring
8
Burner head
@
Thermocouple
H
Ignition plug