NOMA MARSHALL 52 Manuel D'utilisation page 20

NOTE: On start-up your ceiling fan will oscillate back and forth. This is
NORMAL OPERATION for DC ceiling fan as it goes through its calibration
cycle. The fan is NOT DEFECTIVE.
02
1. Fan button. Press and release the
•
Fan on/off. The fan memory function will store the current setting for the next
time the fan is in use.
2. 1,2,3,4,5,6 buttons:
•
These six buttons are used to set the fan speed as follows:
1=low speed
3=medium speed 4=medium high speed
5=high speed
3. Light functions
•
Press and release
•
Press and release
temperature.
•
Press to increase the desired light level.
•
Press to decrease the desired light level.
4. Fan reverse button
•
(Counter-clockwise direction) A downward air flow creates a cooling effect.
This allows you to set your air conditioner on a higher setting without affecting
your comfort.
•
(Clockwise direction) An upward air flow moves warm air off the ceiling. This
allows you to set your heating unit on a lower setting without affecting your
comfort.
Installing The Remote Control Holder
Attach the remote control holder with the two
remote control holder mounting screws.
button to turn the fan on or off.
2=medium low speed
6=extra high speed
button one time to turn the light on or off.
button to select the desired colour
(Must be pushed when the fan is in operation.)
20