Publicité
Les langues disponibles
Les langues disponibles
ASSEMBLY
INSTRUCTIONS
Fig. 1
01
Turn OFF the electric circuit at the main
fuse of circuit breaker box (Fig. 1).
Hanger
Pin
03
Remove the lock pin and take out the hanger
pin; then remove the hanger ball from the
downrod assembly by loosening the set
screw and removing the cross pin (Fig. 3).
Cross Pin
Hanger Ball
Downrod
Lock
Pin
Fig. 3
Hanger
Bracket
02
Securely attach the hanger bracket to
an outlet box marked "ACCEPTABLE FOR
FAN SUPPORT" using the supplied outlet
box screws with spring washers (Fig. 2).
Hanger
Pin
04
Thread the motor wires safety cable through
the downrod and downrod stand. Insert the
downrod into the collar. Slide hanger pin
through holes of collar and downrod (Fig. 4).
Warning: Ensure wiring is not pinched or
twisted.
13
05
Outlet
Box
Outlet Box
Fig. 2
Downrod
Lock
Pin
Fig. 4
Screw
Publicité
