NOMA MARSHALL 52 Manuel D'utilisation page 18

12
Remove 3 light kit screws from the fan motor assembly. Attach the light plate to the fan motor
assembly. Secure by tightening the 3 screws (Fig. 12).
13
While holding the LED assembly under your fan, firmly snap the wire connection plugs together.
Align the two arrow marks on the light plate and the LED assembly, then turn the LED assembly
clockwise until it stops to ensure tight fit (Fig. 13).
Motor
Assembly
Light Plate
Round Hole
Light Plate
Light kit screws
Fig. 12
Connection
Plugs
18 W LED
Assembly
Fig. 13
18