Publicité
Les langues disponibles
Les langues disponibles
Troubleshooting
Symptom
●The appliance does
not turn on.
●You hear three
beeps.
●The appliance stops
during use.
●The mixture leaks
out.
●The blade is turning
but not cutting any
ingredients.
20
Point to check
→
Is the appliance unplugged?
→
Is the lid assembly seated properly on the container?
Is the container assembly attached
→
correctly and securely to the main unit?
→
Are the ingredients caught on something?
Are you using the appliance with
the dial set to something other
than "0"?
→
Has the container assembly come
→
loose at the start of or during mixing?
Has the appliance been used for
→
a long time?
Are the ingredients caught on the
→
blade?
Have ingredients that cannot be
→
mixed been inserted?
Has an excessive amount of
→
ingredients been inserted?
Are there not enough liquids in
→
the mixture?
Is the lid assembly seated
→
properly on the container?
Is the container assembly
→
attached correctly and securely?
Is the gasket, lid gasket, and
→
blade base attached?
Is the gasket or lid gasket
→
damaged?
→
Has an excessive amount of
ingredients been inserted?
→
→
Are there not enough liquids (water, milk, etc.)?
Are the ingredients caught on
→
something?
Check the following before
requesting repairs.
Action to take
→
Securely connect the plug to an outlet.
→
Securely attach the lid assembly.
Correctly and securely attach the
→
container assembly.
→
Remove all the ingredients and reinsert them.
Attach the container assembly to the main unit,
→
set the dial to "0," and then plug in the appliance.
With the appliance plugged in, set
→
the dial to "0," and then attach the
container assembly to the main unit.
Correctly and securely attach the
→
container assembly.
Wait approximately 30 minutes
→
before using the appliance.
Remove all the ingredients from the
→
container assembly and reinsert them.
Remove any ingredients that cannot be
→
mixed, and then start operation again.
Reduce the amount of ingredients,
→
and then start operation again.
Reduce the amount of ingredients, add
→
more liquids. and then start operation again.
Securely attach the lid assembly.
→
Securely attach the container
→
assembly.
Securely attach the gasket, lid
→
gasket, and blade base.
Please contact TIGER
→
CORPORATION U.S.A. and
purchase a new gasket or lid gasket.
Reduce the amount of
→
ingredients.
→
Increase the amount of liquid (water, milk, etc.).
Use a spatula or something similar
→
to remove the caught ingredients.
Page to
check
→
12
→
8, 11
→
11
→
12
→
8
11
12
→
→
11
→
—
12
→
19
10
→
19
10
→
19
10
→
19
8
→
11
→
10
10, 11
→
18
→
22
10 to
→
13
→
10 to 13
→
12
Publicité
