Publicité
Les langues disponibles
Les langues disponibles
Bottom lid
(1)
Top lid
Lid gasket
With the gasket
attached
Lid gasket
Lid
Bottom lid
gasket
(1) Align the "▲" and
"▼."
(2) Turn the lid assembly clockwise.
Lid tab
Activation switch slot
Click
4
Fit the bottom lid into the top lid.
(2)
5
Attach the gasket to the bottom lid.
● Be sure to securely fit the gasket on the bottom lid before use. Failure to do so may
lead to the mixture leaking out.
6
Attach the lid assembly to the container.
Make sure the gasket is set correctly on the lid. → P. 18
‘
(1) Orient the parts so the "▼" on the lid assembly is aligned with the "▲" on the container.
(2) Turn the lid assembly clockwise until its "(
● The operation switch cannot be pushed in if the lid is not closed completely.
Click
Set the dial to "0" and attach the container assembly
7
to the main unit.
Align the lid tab with activation switch slot.
‘
● Make sure the container assembly is attached securely.
<If you cannot seat the assembly properly>
Turn the blade rotator of the main unit slightly,
‘
and then attach the assembly.
Caution
)" is aligned with the position in the figure.
Caution
Caution
Fit in the
groove.
How to Use
Blade
rotator
11
Publicité
