Publicité
Les langues disponibles
Les langues disponibles
How to Clean Inside the Container Assembly
Clean the appliance after using it to mix ingredients that leave behind stains that do not come off easily.
‘
Insert the blade base in the container,
1
and then pour cold or lukewarm water
into the container.
* Be sure to attach the gasket.
[Guideline for the amount of cold or lukewarm water]
Pour the water to the 400 ML level. → P. 9
Insert a small amount (a few drops) of
2
mild detergent for household use, and
then securely attach the lid assembly.
Attach the container assembly to the
3
main unit, set the dial to "10," and then
mix the contents for approximately
30 seconds. → P. 10 to 12
When the Appliance Stops During Use
If you use an excessive amount of ingredients or otherwise subject the motor to an excessive load, a safeguard will
‘
activate and stop the operation of the appliance. This is not a malfunction. Follow the procedure below to solve this
problem.
1
Stop the appliance, and then unplug it.
Reduce the amount of ingredients.
2
→ P. 10 to 12
* Remove any ingredients that cannot be mixed.
* If ice is caught on the blade, remove the ice
out with cold water.
* Use a spatula or something similar to remove
any ingredients that have affixed to the area
around the blade.
Maintenance / When You Have a Problem
If the stains do not come off easily,
4
repeat step
a few times.
3
Set the dial to "0," and then discard the
5
water.
Unplug the appliance, and then clean
6
each part. → P. 17, 18
Start the appliance.
3
* If the appliance stops immediately, wait at
least 30 minutes before using it.
* If the appliance still stops frequently even
after you perform the above procedure and
you want to have the appliance repaired,
please contact TIGER CORPORATION
U.S.A.
19
Publicité
