Wilfa CHILL CONNECTED AC1B-7000C Manuel D'instructions page 8

INSTRUCTION MANUAL · AIR CONDITION
Step 2: Connect the windows kit adapter to the other end of the exhaust hose.
EN
Step 3: Adjust the window brackets to the width or height of your window, and
insert the plastic pins to fix the desired position.
Plastic pin
Plastic pin
Step 4: Connect the window bracket to the window kit adapter. Ensure all con-
nections are tight and installed properly.
Step 5: Connect the window bracket to the window.
Step 6: Adjusting the length of the flexible exhaust hose and avoid bends in the
hose. Then place AC near an electrical outlet.
Note: do not install the window
bracket to the window. This step is
only to adjust to the size of your win-
dow. The bracket should be removed
after the size is adjusted.
12
CHILL CONNECTED · AC1W-7000/ AC1B-7000C/ AC1B-9000C
CONTROL PANEL AND DISPLAY
1 LOCK Press and hold this key to turn on or turn off the
child lock function
2 MODE Mode button Press to switch the operation mode
between fan, cooling and dehumidifier.
3 UP Increasing the desired temperature (16°C - 32°C) or
timer setting
4 POWER Press to switch the machine on or off
5 DOWN Decreasing the desired temperature or timer setting.
6 SPEED Press to switch the fan speed between HIGH and
LOW
7 TIMER Sets a time for the unit to automatically start or stop.
8 SLEEP Press to enter sleep mode. Can only be entered in
cooling mode
9 Fan speed The display for fan speed in High or low
10 Led Display This LED Display the Room Temperature or Time
Setting
11 Mode Display This display the Mode Setting between fan, cooling
and dehumidifier
13
EN