Wilfa CHILL CONNECTED AC1B-7000C Manuel D'instructions page 11

INSTRUCTION MANUAL · AIR CONDITION
TROUBLESHOOTING
EN
Problem Possible reasons
The unit is not Check the power
operating connection in securely.
Check if the water level
indicator lights up?
Check the room
temperature.
The unit works Check the air filter for dust.
with reduced
capacity.
Check if the air duct is
blocked.
Check if the door or window
is open.
Check if the desired
operating mode is selected
and the temperature is
properly set.
The exhaust hose is
detached.
Water Leakage Overflow while moving the
unit.
Check if the drain hose is
kinked or bends.
Excessive Noise Check if the unit is securely
positioned.
Check if any loose, vibrating
parts.
Noise sounds like water
flowing.
Solutions
Insert the power cord
securely into the wall outlet.
Empty the drain pan by
removing the rubber plug.
The range of operating
temperature is 5-35°C.
Clean the air filter as
necessary.
Clear the obstacle.
Keep the door and windows
closed.
Set the mode and
temperature at desired point
according the manual (see
page 16).
Make sure the exhaust hose
is securely attached.
Empty the water tank before
transport.
Straighten the hose to avoid
a trapping water.
Place the unit on horizontal
and firm floor.
Secure and tighten the parts.
Noise comes from flowing
refrigerant. This is normal.
18
CHILL CONNECTED · AC1W-7000/ AC1B-7000C/ AC1B-9000C
STORAGE
Long-Term Storage - If you will not be using the unit for an extended period of
time (more than a few weeks) it is best to clean the unit and dry it out completely.
Please store the unit per the following steps:
1. Unplug the unit and remove exhaust hose and window kit store with the unit.
2. Drain the remaining water from the unit.
3. Clean the filter and let the filter dry completely in a shaded area.
4. Re-install the filter at its position.
5. The unit must be kept in upright position when in storage.
6. Preserving the machine in ventilating, dry, non- corrosive gas and safe place
indoor.
WIFI DESCRIPTION
INFORMATION ON THE APP "WILIFE"
The "WiLife" app is available for android and iOS. Scan the corresponding QR
code to get directly to the download.
INFORMATION ON HOW TO USE THE APP
This appliance allows you to operate the appliance via your home net-work.
A prerequisite is a permanent Wi-Fi connection to your router and the free app
"WiLife".
We recommend disconnecting the appliance from the power supply when you
are away from home to prevent unintentional switching on while you are on the
road.
SYSTEM REQUIREMENT FOR USE OF THE APP
• iOs 11.0 or higher
• Android 5.0 or higher
• Bluetooth 4.2
19
EN