Wilfa CHILL CONNECTED AC1B-7000C Manuel D'instructions page 6

INSTRUCTION MANUAL · AIR CONDITION
• Do not touch the air inlet or the aluminum fins of
EN
the unit.
• Do not operate the unit if it is dropped, damaged
or showing signs of product malfunction.
• Do not clean the appliance with any chemicals.
• Ensure the unit is far away from fire, inflammable,
or explosive objects.
• The unit shall be installed in accordance with
national wiring regulations.
• Do not use means to accelerate the defrosting
process or to clean, other than those recommended
by the manufacture.
• The appliance shall be stored in a room without
continuously operation sources (for example:
open flames, an operating gas appliance or an
operating electric heater).
• The appliance shall be stored so as to prevent
mechanical damage from occurring.
• Do not piece or burn, even after use.
• Be aware that refrigerants may not contain an odour.
• Pipe-work shall be protected from physical damage
and shall not be installed in an unventilated space,
if that space is smaller than 8m².
8
CHILL CONNECTED · AC1W-7000/ AC1B-7000C/ AC1B-9000C
• Compliance with national gas regulations shall be
observed.
• Keep any required ventilation openings clear of
obstruction.
• The appliance shall be stored in a well-ventilated
area where the room size corresponds to the room
area as specified for operation.
Any person who is involved with
working on or breaking into a
refrigerant circuit should hold a
WARNING current valid certificate from an
industry-accredited
authority, which
competence to handle refrigerants
safely in accordance with an industry,
recognized assessment specification.
Servicing shall only be performed
as recommended by the equipment
manufacturer. Maintenance and repair
WARNING requiring the assistance of other
skilled personnel shall be carried out
under the supervision of the person
competent in the use of flammable
refrigerants.
assessment
authorizes their
9
EN