Wilfa CHILL CONNECTED AC1B-7000C Manuel D'instructions page 12

INSTRUCTION MANUAL · AIR CONDITION
COMMISSIONING VIA THE APP FOR WIFI
EN 1. Install the "WiLife" app. Create a user account.
2. Activate the Wi-Fi function in the settings of your appliance.
3. Place the appliance at a distance of about 5 meters to your router.
4. Press and hold the Timer button for about 3 seconds. The Wi-Fi lamp will flash
rapidly.
5. Launch the app and select "+".
6. Select the "Air Conditioner" menu and follow the instructions on the display.
7. Once the appliance has been successfully connected, the Wi-Fi lamp lights
up. Now you can operate the appliance using the app.
8. Press and hold the Timer button for about 3 seconds, the appliance discon-
nect, the Wi-Fi lamp lights off.
COMMISSIONING VIA THE APP FOR BLUETOOTH
1. Install the "WiLife" app. Create a user account.
2. Turn on the Bluetooth on your smartphone.
3. Turn on the device.
4. Within 10 meters of the device, open the app, and the device should appear
automatically on the bottom of your screen
5. Follow further instructions on the app
20
CHILL CONNECTED · AC1W-7000/ AC1B-7000C/ AC1B-9000C
TROUBLESHOOTING CONNECTION
Problem Solutions
The device does not show up in the Make sure your Bluetooth is turned
app when you try to connect with wi-fi on on your smartphone. Turn your
internet off for 3 minutes. Keep
your phone within 10 meters of the
unit and try to connect again using
bluetooth.
The device does not show up in the Press the + in the upright corner and
app when you try to connect with press "large home appliances", then
Bluetooth add air conditioner. Press and hold
the timer button 3 seconds until the
wi-fi lamp flashed rapidly. Then follow
the instructions on the app
The app is not working to control the Make sure you are connected to the
device wi-fi. If the wi-fi is down, make sure
you are connected to Bluetooth
Turn the device off for 5 seconds and
turn it back on.
Restart the application.
21
EN