Publicité
now you can Set off on your traVelS
1
Avoid continuous running. Allow the motor to cool down approxi-
mately 30 minutes after running.
Attention!
Switch on transmitter first, then switch on RC model. Make sure to
follow this order when turning on your RC model.
cautIonS when operatIng the rc model
3
traIler couplIng
Left
control lever
2
Never run the model on public roads or streets, as it could endan-
ger traffic.
• Never run the model in crowded areas, near or toward people
or animals, to prevent property damage and/or personal injury.
• Never run the model on grassland. Twining grass may hinder
axle rotation and may cause motor heat buildup.
• Never run the model near rivers, ponds or lakes as to prevent
RC model from dropping into the water.
First activate the trailer coupling function on the underside of the
chassis.
Then push the left control lever to the right, to open the coupling.
The control lever must then be pushed to the left, to close the
coupling.
21 // GB
Publicité
