Osd Menu; Calling Osd Menu, Selecting Functions - Conrad 551319 Notice D'emploi

9. OSD Menu

In the OSD menu ("OSD" = On-Screen-Display), settings for the indoor unit can be made. This includes display
brightness, time/date, TV system PAL/NTSC, etc.
a) Calling OSD Menu, Selecting Functions
• With the indoor unit in standby or the camera image displayed, briefly press the button "
menu appears in the display.
• Select the desired submenu with the buttons " V-" (20) and " V+" (22). Then push the button "
the selected submenu.
There are the following four submenus:
"Camera Setup":
"Recorder Setup":
"Event List":
"System Setup":
The settings and displays of the four submenus are explained in detail in the following sections.
• The button " /ESC" (23) takes you back to the OSD menu. The same button can be used to leave the OSD menu
and the normal camera image appears again.

The OSD menu is left automatically if no button is pushed for about one minute.
38
Setting the brightness
Starting pairing
Automatic recording on/off
Formatting the SD memory card
SD overwriting mode on/off
Display of the recordings on the SD memory card
Setting time/date
Display Firmware version
Switch TV system between PAL/NTSC
Resetting to the factory settings
/MENU" (28). The OSD
" (19) to call
OK