Publicité
Les langues disponibles
Les langues disponibles
If there is any break in the power supply
while the dishwasher is operating, a
special memory stores the selected
programme and, when the power is
restored, it continues from where it left off.
Programme operations
(only for free-standing models)
While a programme is running, the display
shows the name of the programme chosen,
the relating temperature and the time
remaining to the end of the cycle, which is
automatically updated.
Programme end
A 5 second buzzer will sound (if not muted)
3 times at 30 second intervals to signal that
the programme has ended.
If the "OPEN DOOR" feature is enabled,
during the drying phase the door will
open automatically and you will have to
wait until for the end-of-cycle signal
before removing the dishes.
POWER WASH (only on some
models)
In
some
programmes
programmes),
the
positioned at the bottom of the dishwasher
POWER WASH, will also be enabled.
This feature is ideal when cleaning heavily
soiled tableware or cookware, placing them
directly in the area of the basket above the
POWER WASH arm.
(see
table
third
washing
arm,
POWER WASH
Option buttons
The option buttons provide you with further
wash options, allowing you to customise the
wash programmes (see the table in chapter
17 for a list of programmes on which each
option can be enabled).
Options are enabled (or disabled) before
starting the programme, using the appropriate
buttons. The relevant indicator lights will
appear (or disappear) on the display.
The option button should be enabled after
you have chosen the wash programme.
If an option is selected that is not
compatible with the selected programme
then the option indicator light first flashes
and then goes off.
"OPEN DOOR" button "
(AUTOMATIC DOOR OPENING)
This option enables a special device that
opens the door by a few centimetres during
or at the end of the drying cycle (depending
on the programme). This ensures the natural
and efficient drying of dishes. The duration of
the selected cycle will automatically change to
obtain the optimal temperature for the rinse
cycle;
this
significantly
of
consumption. The automatic door opening
during the last drying phase enables the air to
circulate, removing the risk of bad odours.
When the door opens, the message "OPEN
DOOR" will appear on the display.
This option is automatically enabled in the
"ECO" programme. In any case, it is
possible to disable it. The "OPEN DOOR"
feature is not available in the "RAPID 39'",
"RAPID 29'" and "PREWASH" programmes.
WARNING
With this option selected, you must not in
any way prevent the door from opening or
force it shut, as this would damage the
mechanism. Ensure that there is free space
in front of the door and, before closing, wait
for the opening device to complete its activity.
106
reduces
energy
Publicité
