Hoover AXI HDPN 4S622PX Mode D'emploi page 103

15. PROGRAMME SELECTION
AND SPECIAL FEATURES
DISPLAY Description
The display keeps you constantly informed
on the operation of the appliance.
1) TEMPERATURE DISPLAY
Indicates the washing temperature of
each programme selected.
2) PROGRAMME DISPLAY
Indicates set
provides information on set options,
reports any faults and so on.
3) TIME REMAINING DISPLAY
Indicates the wash
selected programme and provides the
time remaining to the end of the
programme.
4) WATER SUPPLY CLOSED INDICATOR
LIGHT
Indicates any fault in the inflow of water
between the tap and the dishwasher
(see "TROUBLESHOOTING
WARRANTY").
5) "SALT EMPTY" INDICATOR LIGHT
6) "RINSE AID
LIGHT
7) Wi-Fi CONNECTION INDICATOR LIGHT
8) "OPEN DOOR" OPTION INDICATOR
LIGHT
9) PROGRAMME INDICATOR LIGHTS
wash programmes,
time for each
AND
EMPTY" INDICATOR
10) "Total care" PROGRAMME INDICATOR
LIGHT
When the Total Care programme is
enabled, the corresponding indicator
light comes on.
11) "HALF LOAD" OPTION INDICATOR
LIGHT
12) "EXTRADRY" OPTION INDICATOR
LIGHT
13) "ADDISH" indicator light
WARNING
Touching the display in the first few
seconds after you have plugged in
the appliance could interrupt its self-
calibration procedure, thus jeopardising
the appliance's proper functioning. In
this case, take out the plug and repeat
the operation.
ON/OFF button
At the end of the cycle, remember to
switch off the appliance using the
ON/OFF button, then remove the plug
and close the water supply.
First time you switch on the
appliance
l
When you have connected the appliance
to the mains and switched it on via the
Start/Reset
appear on the display.
l
The appliance is now in language setting
mode.
l
Select the language desired by pressing
the HALF LOAD
buttons, then confirm your selection by
pressing the "Start/Reset" button.
l
A "WELCOME" message will appear on
the display for 5 seconds.
103
button, "ENGLISH"
and EXTRADRY
will