AVer Vision F17+ Mode D'emploi page 25

M o u nti n g t h e F 1 7 + o n a F lat S u rfa c e
Measure and mark the horizontal of 75 mm from the center line distance between the holes
on the flat surface as describe in the illustration below. Use 2 pieces of M4.0 screws for 6
mm holes and secure the F17+ on the flat surface.
75mm
A nti - g l a r e Sh e e t
The anti-glare sheet is a special coated film that helps eliminate any glare that may be
encountered while displaying very shiny objects or glossy surfaces such as magazines and
pictures. When encountering such difficulties, place the anti-glare sheet on the top of the
shiny document to reduce reflected light.
19