EINHELL Bavaria 45.130.86 Mode D'emploi page 7

Anleitung BAS 14 4_SPK1:_
Forward/Reverse switch (3)
With the slide switch above the On/Off switch you
can select the direction of rotation of the battery-
powered drill/screwdriver and secure it against being
switched on accidentally. You can choose between
clockwise and anticlockwise rotation. To avoid
causing damage to the gearing it is advisable to
change the direction of rotation only when the tool is
at a standstill. The On/Off switch is blocked when
the slide switch is in centre position.
On/Off switch (4)
Infinitely variable speed control is possible with the
On/Off switch. The further you press the switch, the
higher the speed of the battery-powered
drill/screwdriver.
Screwdriving
We recommend using self-centering screws (e.g.
Torx screws, recessed head screws) designed for
reliable working. Be sure to use a bit that matches
the screw in shape and size. Set the torque, as
described elsewhere in these operating instructions,
to suit the size of screw.
6. Technical data
Voltage supply 14.4 V d.c.
Speed 0-550 rpm
Torque
Forward and reverse rotation
Chuck clamping width 1.0 - 10 mm
Battery charging voltage
Battery charging current
Mains voltage for charger 230 V ~ 50 Hz
Sound pressure level L
pA
Sound power level L
WA
Vibration a
hv
18.07.2007 9:26 Uhr
7. Ordering replacement parts
Please quote the following data when ordering
replacement parts:
Type of machine
Article number of the machine
Identification number of the machine
Replacement part number of the part required
For our latest prices and information please go to
www.isc-gmbh.info
16 levels
yes
18 V d.c.
400 mA
68.9 dB
79.9 dB
< 2.5 m/s 2
Seite 7
GB
7