Installation Instruction - BORETTI M-SYSTEM MCM-400 Notice D'emploi

Please Read the Manual Carefully Before Installation
SCREW A
ADJUST SCREW B
SCREW C
Please Note
Electrical connection
The oven is fitted with a plug and must be only connected to a properly installed earthed
socket. In accordance with the appropriate regulations, the socket must only be installed and
the connecting cable must only be replaced by a qualified electrician.
If the plug is no longer accessible following installation and all-pole isolating switch must
be present on the installation side with a contact gap at least 3mm.
A. Built-in furniture
The built-in cabinet shall not have a rear wall behind the appliance.
Minimum installation height is 85cm.
Do not cover ventilation slots and air intake points.

Installation Instruction

BOTTOM BRACKETS
EN-17