Publicité
CHANGING LIGHT BULB
Always disconnect the machine from power supply
by removing the plug from the wall-outlet.
CAUTION
1. Remove the screws, and face cover.
2. While holding the socket, move it back and forth gently to
remove it from the bracket.
3. Take the light bulb out of the socket and insert a new light
bulb (part # 085303) securely into the socket so that the pins
on the light bulb fit into the pin holes in the socket.
4. Insert the socket into the hole in the bracket.
5. Return the face cover to its original position. Align the face
cover so that the projection fits onto the pin on the sewing
machine.
94
1, 5
Face cover
Plaque frontale
Screw
Cubierta frontal
Vis
Guia
Remove
2
Retirez
Saque
Socket
Connecteur
Conector
3
Replace
Remplacez
Cambie
Replace
Remplacez
Cambie
Pin
Socket
Butée
Connecteur
Pasador
Conector
Pin hole
Trous de broches
Agujeros de clavijas
Socket
Connecteur
Conector
Light bulb
Ampoule d'éclairage
Bracket
Bombilla
Support
Mensula
Replace
4
Remplacez
Cambie
Bracket
Support
Mensula
Light bulb
Ampoule d'éclairage
Bombilla
Remove
Retirez
Saque
Remove
Retirez
Saque
Light bulb
Ampoule d'éclairage
Bombilla
Publicité
