Publicité
Les langues disponibles
Les langues disponibles
push Stick -- A device used to feed the work piece through the saw to help keep the operator's hands well
away from the blade.
rabbet -- A notch in the edge of the work piece.
resin -- A sticky, sap-based substance that has hardened.
rip Cut -- A cutting or shaping operation made along the length of the work piece.
rip fence -- Adjustable guide used in ripping cuts to keep the work piece parallel to the saw blade.
rpM -- Revolutions per Minute. The number of turns completed by a spinning object in one minute.
Saw Blade path -- The area over, under, behind, or in front of the blade. As it applies to the work piece, that
area which will be, or has been, cut by the blade.
SYMBoLS
Some of the following symbols may appear on this product. Study these symbols and
learn their meaning. proper interpretation of these symbols will allow for more efficient
and safer operation of this product.
SYMBOL
V
Volts
A
Amperes
Hz
Hertz
W
Watts
No Load Speed
kg
Kilograms
H
Hours
RPM
Revolutions per minute
SPM
Strokes per minute
OPM
Oscillations per minute
.../min
Per minute
DESCRIPTION
This symbol designates that this tool is listed by the
Canadian standards association, to united States
and Canadian standards
SYMBOL
DESCRIPTION
Alternating current
or A.C.
Direct current
or D.C.
Class II construction
Double Insulated construction
Warning symbol. Precautions
that involve your safety
To reduce the risk of injury,
read Operator's Manual be-
fore using this product.
Wear safety glasses, ear
protection and respiratory
protection
Do not dispose with house-
hold waste
Do not touch the running
blade
Do not use in wet conditions
Do not put battery in fire
Battery cannot exceed 59° C
7
Publicité
