Continental Fireplaces Gas Insert Serie Manuel D'utilisation page 3

congratulations
1.0 getting to know your appliance
1.1 control access
1.2 rating plate information
2.0 operating your appliance
2.1 using your appliance
2.2 on/off components
2.2.1 changing the batteries
3.0 operation (millivolt)
4.0 operation (electronic)
4.1 extreme cold lighting instructions
5.0 remote control layout
5.1 general transmitter layout
5.2 temperature display
5.3 in the event of a battery failure
5.4 low battery
6.0 clearances around fireplace
7.0 maintenance
7.1 care of glass
7.2 care of plated parts
7.3 safety barrier and glass door removal / installation
8.0 replacement parts
9.0 accessories for CDI3-1/CDI3EA-1
10.0 troubleshooting
11.0 warranty
This owner's manual is written for a complete series of fi replaces that have a variety of different features and speci-
fi cations. Before reading this manual, be sure you know which model of fi replace that you have. This information
will have been fi lled out by the installer on the following page and on the rating plate that is permanently attached
to the fi replace (see "rating plate information" section).
This manual is for the:
• Gas Insert Series (CDI3-1 / CDI3EA-1 models)
If required, more detailed technical information is included in the fi replace installation manual.
The information throughout this manual is believed to be correct at the time of printing. Wolf Steel Ltd. reserves
the right to change or modify any information within this manual at any time without notice. Changes, other than
editorial are denoted by a vertical line in the margin.
Visit the Continental website for the most current version of your appliance's manual.
table of contents
W415-3142 / 03.31.22
EN
4
5
6
6
7
7
7
8
9
10
10
11
11
11
12
12
13
15
16
16
17
18
19
21
22
3