Publicité
Les langues disponibles
Les langues disponibles
Specifications
E
N
G
L
I
GENERAL
S
H
Power Supply
Maximum Power Output
21
Tone Action
Current Consumption
Pre-Amp Output Voltage
Speaker Impedance
Dimensions (W x H x D)
Weight
AM RADIO
Frequency Range
Useable Sensitivity
FM STEREO RADIO
Frequency Range
Useable Sensitivity
50 dB Quieting Sensitivity
Frequency Response
Capture Ratio
Alternate Channel Selectivity
Stereo Separation
Image Response Ratio
IF Response Ratio
Signal/Noise Ratio
TAPE PLAYER
Reproduction System
Tape Speed
FF/REW Time
Frequency Response
Wow and Flutter
Signal/Noise Ratio
*Above specifications comply with EIA standards.
Note:
Specifications and design are subject to modification without notice due to improvements in
technology.
30
: 12 V DC (11 V - 16 V) Test Voltage 14.4 V, Negative ground
: 40 W x 4 channels at 400 Hz, Volume Control maximum
: Bass ; ± 12 dB at 100 Hz
Treble; ± 12 dB at 10 kHz
: Less than 2 A (tape mode, 0.5 W 4-speaker)
: 2.0 V (CD Play mode; 1kHz 0 dB)
: 4 Ω (4 - 8 Ω acceptable)
: 7" x 1-15/16" x 5-7/8" (178 x 50 x 150 mm)
: 3 lbs. 8 oz. (1.6 k g )
: 530 - 1,710 kHz
: 28 dB/µV (25 µV/ S/N 20 dB)
: 87.9 - 107.9 MHz
: 13.2 dBf. (1.25 µV/ 75 Ω)
: 15.2 dBf. (1.6 µV/ 75 Ω)
: 30 - 15,000 Hz ±3 dB
: 1.5 dB
: 75 dB
: 35 dB at 1,000Hz
: 65 dB
: 100 dB
: 70 dB
: 4-track, 2-program stereo
: 1-7/8"/sec (4.76 cm/sec)
: Less than 110 sec (C-60)
: 35 - 14,000 Hz ±3 dB (normal)
: 35 - 17,000 Hz ±3 dB (metal)
: 0.12 % (WRMS)
: 52 dB, 62 dB (Dolby B NR on)
CQ-R221U
Publicité
