Panasonic CQ-R221U Manuel D'instructions page 25

2. Secure the rear of the unit.
a) Check the electrical connection by referring to this operating instructions.
b) Connect the Mounting Bolt
c) Insert the Power Connector
Power Connector
Unit
d) Insert the unit into Mounting Collar
e) Secure the rear of the unit to the car by either of the two recommended methods as follows.
Using the Rear Support Strap
Affix one end of the Rear Support Strap
Wall of Car, or some other metallic area.
Using the Rubber Cushion (Option)
(If there is an existing Rear Support Bracket on the Fire Wall of Car.)
Cover Mounting Bolt on the rear of the unit with Rubber Cushion (Option), and mount it into
the existing Rear Support Bracket.
Tapping Screw
3. After installation, reconnect the negative (–) battery terminal.
using a suitable wrench.
to the unit.
Mounting Bolt
and push it in until "click" is heard.
Fire Wall of Car
3 mmø
Hex. Nut
Rear Support Strap
Mounting Bolt
Mounting Collar
to the rear of the unit, and the other end to the Fire
Rear Support Bracket
(existing on the car)
Unit
Rubber Cushion
(Optional)
Mounting Bolt
Mounting Collar
CQ-R221U
E
N
G
L
I
S
H
16
25