Publicité
Tools Required / Outiles Utiles /
Herramientas Útiles
¼" / 6 mm
2
1¾"
⅞"
4¼"
English
Installation Considerations
• For best results, Hansgrohe recommends that
this unit be installed by a licensed, professional
plumber.
• Please read over these instructions thoroughly
before beginning installation. Make sure that you
have all tools and supplies needed to complete
the installation.
• This wallbar is not for use as a grab bar.
• The screws and anchors included with this set
are suitable for use in a tile or other solid surface
wall. They are not suitable for use in an acrylic
or fiberglass shower enclosure. Please contact
the manufacturer of the enclosure regarding
recommended mounting locations, reinforcement
requirements, and mounting hardware.
• This unit does not include a wall supply. It must
be used with Hansgrohe model 27458xx3 or
another approved supply that complies with
ASME A112.18.1/CSA B125.1 including ASME
A112.18.3.
• To prevent scald injury, the maximum output
temperature of the shower valve must be no more
than 120°F.In Massachusetts, the maximum
output temperature of the shower valve can be no
higher than 112°F.
• Keep this booklet and the receipt (or other proof
of date and place of purchase) for this product in
a safe place. The receipt is required should it be
necessary to request warranty parts.
Publicité
